Log Burner & Stove Installation at Great Prices

Wolverhampton | Birmingham | Telford | Oxford | Farnham | Exeter | Gloucester | Aylesbury | Bristol | Cheltenham | Oxford | Midlands | Somerset | Wiltshire | Surrey | Buckinghamshire | Hampshire | Berkshire | and many other parts of the UK

0800 832 1860

Freephone | Free Quotes

November 2021

Latest update from Stove Specialists Ltd via Stove Specialists Ltd – stove installation Stove Specialists Ltd Unit 1C, Chetwynd Lodge Chester Road Newport, Telford TF10 8AB +44-1902-519089

Read More »

A lovely Portway Arundel by Portway Stoves installed by our HETAS registered engineer in Chertsey with a slate hearth & oak beam 🔥

A lovely Portway Arundel by Portway Stoves installed by our HETAS registered engineer in Chertsey with a slate hearth & oak beam 🔥 Latest update from Stove Specialists Ltd via Stove Specialists Ltd – stove installation Stove Specialists Ltd Unit 1C, Chetwynd Lodge Chester Road Newport, Telford TF10 8AB +44-1902-519089

A lovely Portway Arundel by Portway Stoves installed by our HETAS registered engineer in Chertsey with a slate hearth & oak beam 🔥 Read More »

When choosing wood for a fire, it’s important that you know what type you are burning & what is best for a fire. The main reason for the differences are wood density & moisture retention. Wood that is of a high density & high moisture retention being the worst example of firewood, providing little fuel for a fire to burn & burning with a very low intensity. We have ranked the wood types you may use. The ranking going from Very Good to Very Poor. Bear in mind that these ranking assume the wood is in an optimal condition for burning: ie cut into small, dry, pieces. Alder – Poor – The fire it produces is very low heat and does not last long. Not good for any kind of fire. Apple – Good – Produces small but long lasting flame that gives off very little spitting or smoke. Ash – Very Good – Considered the best wood for burning (as the name would suggest). It produces a long lasting flame with a high heat output, it can even be burnt relatively effectively without being dried. Beech – Very Good – Burns very much like Ash, but does not burn well when not dried. Birch – Fair – Produces good heat but bruns very quickly. The unseasoned wood can also cause sap deposits to build up in a stove. Blackthorn – Good – Slow burning with moderate heat output. Very Good for smaller indoor fires. Cedar – Good – Produces good slow burning heat, but tends to spit and leaves sap deposits with prolonged use. Cherry – Good – Very good while in season, with a long lasting hot flame, but is a terrible burning wood when not in season due to high smoke and sap output. Chestnut – Poor – Produces a very small flame with a low heat output. Douglas Fir– Poor – Produces a very small flame with a low heat output, as well as leaving sap deposits in stoves with prolonged use. Elder – Poor – Produces a very small flame with a low heat output. Elm – Fair – Elm is a good burner when dry, the problem is drying the wood as it has a very high moisture retention, taking 2 years to get into a state where the wood is suitable for burning. Eucalyptus – Poor – While it produces a lot of heat, it burns quickly and produces a lot of sap. Using Eucalyptus wood comes with a high risk of a chimney fire, and its short life span makes it unsuitable for a fire pit. Hawthorn – Very Good – The traditional firewood. Very much like Beech Hazel – Good – Good heat but is a moderately fast burner. Holly – Poor – Burns quickly and produces very little heat, but will burn in dry or wet condition, making it easy to start a fire with. Hornbeam – Good – A lot like Birch, it produces good heat, although lasts longer than Birch making it an overall better burning wood. Horse Chestnut – Fair – Produces a good fire heat and lifespan, but spits and sparks a lot, this is less of a problem in a stove but is a safety hazard that must be kept in account. Laburnum – Very Poor – Produces a lot of thick smoke for a very small fire. Do not use. Larch – Fair – Reasonable in both heat and fire life span, but produces a lot of sap if unseasoned. Laurel – Fair – Just like Larch, is a reasonable burning wood but must be seasoned first. Lilac – Good – The smaller branches of the tree make for excellent kindling while the wood itself is a good burner. Lime – Poor – Very little heat output and burns quickly. Maple – Good – Produces a lasting and hot flame. Oak – Good – Oak requires time to season, due to its high density, but is a good burner once seasoned. Pear – Good – Just like Oak, burns well but must be seasoned well. Pine – Fair – A lot like the Eucalyptus for heat output and hazard of a chimney fire, but its flame does last longer, making it a good burner if the correct precautions are taken. Also good for firepits. Plum – Good – Good Heat output and burns fairly slowly. Poplar – Very Poor – Just like Laburnum, poor burner that produces a lot of smoke. Rowan – Very Good – Burns very slowly and produces good heat. An excellent wood type for any fire. Rhododendron – Good – The Wood is very good if it is seasoned, but is otherwise mediocre. Robinia – Fair – A wood that burns slowly and produces good heat, but spits a lot, just like Horse Chestnut. Spruce – Poor – Poor heat and burns quickly. Sycamore – Fair – Good heat output, but burns moderately quickly and must be seasoned first. Sweet Chestnut – Poor – It’s fair for heat and life span, but spits a lot and produces a lot of smoke. Thorn – Very Good – One of the best woods for burning. A long lasting and hot flame with minimal smoke or spitting. Walnut – Fair – Is overall a fair wood for burning. Not especially good or bad for anything. Willow – Poor – Does not burn well even when seasoned. Only thing saving it from being very poor being that it has no hazards attached to it. Yew – Very Good – Very high heat output that lasts a very long time.

When choosing wood for a fire, it’s important that you know what type you are burning & what is best for a fire. The main reason for the differences are wood density & moisture retention. Wood that is of a high density & high moisture retention being the worst example of firewood, providing little fuel

When choosing wood for a fire, it’s important that you know what type you are burning & what is best for a fire. The main reason for the differences are wood density & moisture retention. Wood that is of a high density & high moisture retention being the worst example of firewood, providing little fuel for a fire to burn & burning with a very low intensity. We have ranked the wood types you may use. The ranking going from Very Good to Very Poor. Bear in mind that these ranking assume the wood is in an optimal condition for burning: ie cut into small, dry, pieces. Alder – Poor – The fire it produces is very low heat and does not last long. Not good for any kind of fire. Apple – Good – Produces small but long lasting flame that gives off very little spitting or smoke. Ash – Very Good – Considered the best wood for burning (as the name would suggest). It produces a long lasting flame with a high heat output, it can even be burnt relatively effectively without being dried. Beech – Very Good – Burns very much like Ash, but does not burn well when not dried. Birch – Fair – Produces good heat but bruns very quickly. The unseasoned wood can also cause sap deposits to build up in a stove. Blackthorn – Good – Slow burning with moderate heat output. Very Good for smaller indoor fires. Cedar – Good – Produces good slow burning heat, but tends to spit and leaves sap deposits with prolonged use. Cherry – Good – Very good while in season, with a long lasting hot flame, but is a terrible burning wood when not in season due to high smoke and sap output. Chestnut – Poor – Produces a very small flame with a low heat output. Douglas Fir– Poor – Produces a very small flame with a low heat output, as well as leaving sap deposits in stoves with prolonged use. Elder – Poor – Produces a very small flame with a low heat output. Elm – Fair – Elm is a good burner when dry, the problem is drying the wood as it has a very high moisture retention, taking 2 years to get into a state where the wood is suitable for burning. Eucalyptus – Poor – While it produces a lot of heat, it burns quickly and produces a lot of sap. Using Eucalyptus wood comes with a high risk of a chimney fire, and its short life span makes it unsuitable for a fire pit. Hawthorn – Very Good – The traditional firewood. Very much like Beech Hazel – Good – Good heat but is a moderately fast burner. Holly – Poor – Burns quickly and produces very little heat, but will burn in dry or wet condition, making it easy to start a fire with. Hornbeam – Good – A lot like Birch, it produces good heat, although lasts longer than Birch making it an overall better burning wood. Horse Chestnut – Fair – Produces a good fire heat and lifespan, but spits and sparks a lot, this is less of a problem in a stove but is a safety hazard that must be kept in account. Laburnum – Very Poor – Produces a lot of thick smoke for a very small fire. Do not use. Larch – Fair – Reasonable in both heat and fire life span, but produces a lot of sap if unseasoned. Laurel – Fair – Just like Larch, is a reasonable burning wood but must be seasoned first. Lilac – Good – The smaller branches of the tree make for excellent kindling while the wood itself is a good burner. Lime – Poor – Very little heat output and burns quickly. Maple – Good – Produces a lasting and hot flame. Oak – Good – Oak requires time to season, due to its high density, but is a good burner once seasoned. Pear – Good – Just like Oak, burns well but must be seasoned well. Pine – Fair – A lot like the Eucalyptus for heat output and hazard of a chimney fire, but its flame does last longer, making it a good burner if the correct precautions are taken. Also good for firepits. Plum – Good – Good Heat output and burns fairly slowly. Poplar – Very Poor – Just like Laburnum, poor burner that produces a lot of smoke. Rowan – Very Good – Burns very slowly and produces good heat. An excellent wood type for any fire. Rhododendron – Good – The Wood is very good if it is seasoned, but is otherwise mediocre. Robinia – Fair – A wood that burns slowly and produces good heat, but spits a lot, just like Horse Chestnut. Spruce – Poor – Poor heat and burns quickly. Sycamore – Fair – Good heat output, but burns moderately quickly and must be seasoned first. Sweet Chestnut – Poor – It’s fair for heat and life span, but spits a lot and produces a lot of smoke. Thorn – Very Good – One of the best woods for burning. A long lasting and hot flame with minimal smoke or spitting. Walnut – Fair – Is overall a fair wood for burning. Not especially good or bad for anything. Willow – Poor – Does not burn well even when seasoned. Only thing saving it from being very poor being that it has no hazards attached to it. Yew – Very Good – Very high heat output that lasts a very long time. Read More »

If you’re thinking about installing a wood-burning stove in your home, one of the first things you need to decide is whether it’s really a woodburner you want or a multi-fuel stove. So, what’s the difference? The biggest difference between the two is indicated by their names. A wood-burning stove is only equipped to burn wood. Multi-fuel stoves can also burn wood, but you have the additional option of burning other solid fuels. Grate differences The most obvious difference between a woodburner and a multi-fuel stove that you’ll be able to spot is that a multi-fuel stove has a raised grate. This is because fuels such as coal burn better when they have an air supply from beneath. Wood, by contrast, does not need this sort of air supply to burn effectively. In a multi-fuel stove there is a grate to allow air to circulate below the fuel, whereas in a wood-burning stove the wood will usually sit on the bottom surface of the firebox because it burns best on a bed of ashes. Some solid fuels also burn at hotter temperatures than wood, which means that burning them on a dedicated wood-burning stove can cause damage to the metalwork. Where’s the ashpan? Multi-fuel stove have an ashpan that sits below the grate to gather the ashes. Since wood burns best on a bed of ashes, woodburners do not include ashpans. Instead, you’ll need a shovel or ash vac pot to collect the ashes. The benefits of a multi-fuel stove The flexibility to vary your fuel Easier to clean due to the ashpan Suitable for use in smoke control areas when approved smokeless fuels are burned. Our Multi-fuel best-seller The Portway Arundel XL Multifuel DEFRA Approved Stove, to find out more contact us 🔥 The benefits of a wood-burning stove Better for the environment because only sustainable fuel can be burned More efficient if you plan to burn mainly wood Usually slightly cheaper than the equivalent model of multi-fuel stove. Our Wood-burning best-seller The 5kw Eco Design Ready (2022) – Slimline Ecosy+ Panoramic Wood Burning Stove is a great pick when it comes to dedicated wood-burning stove, to find out more contact us 🔥

If you’re thinking about installing a wood-burning stove in your home, one of the first things you need to decide is whether it’s really a woodburner you want or a multi-fuel stove. So, what’s the difference? The biggest difference between the two is indicated by their names. A wood-burning stove is only equipped to burn

If you’re thinking about installing a wood-burning stove in your home, one of the first things you need to decide is whether it’s really a woodburner you want or a multi-fuel stove. So, what’s the difference? The biggest difference between the two is indicated by their names. A wood-burning stove is only equipped to burn wood. Multi-fuel stoves can also burn wood, but you have the additional option of burning other solid fuels. Grate differences The most obvious difference between a woodburner and a multi-fuel stove that you’ll be able to spot is that a multi-fuel stove has a raised grate. This is because fuels such as coal burn better when they have an air supply from beneath. Wood, by contrast, does not need this sort of air supply to burn effectively. In a multi-fuel stove there is a grate to allow air to circulate below the fuel, whereas in a wood-burning stove the wood will usually sit on the bottom surface of the firebox because it burns best on a bed of ashes. Some solid fuels also burn at hotter temperatures than wood, which means that burning them on a dedicated wood-burning stove can cause damage to the metalwork. Where’s the ashpan? Multi-fuel stove have an ashpan that sits below the grate to gather the ashes. Since wood burns best on a bed of ashes, woodburners do not include ashpans. Instead, you’ll need a shovel or ash vac pot to collect the ashes. The benefits of a multi-fuel stove The flexibility to vary your fuel Easier to clean due to the ashpan Suitable for use in smoke control areas when approved smokeless fuels are burned. Our Multi-fuel best-seller The Portway Arundel XL Multifuel DEFRA Approved Stove, to find out more contact us 🔥 The benefits of a wood-burning stove Better for the environment because only sustainable fuel can be burned More efficient if you plan to burn mainly wood Usually slightly cheaper than the equivalent model of multi-fuel stove. Our Wood-burning best-seller The 5kw Eco Design Ready (2022) – Slimline Ecosy+ Panoramic Wood Burning Stove is a great pick when it comes to dedicated wood-burning stove, to find out more contact us 🔥 Read More »

A lovely installation in Birmingham by our registered HETAS engineer at https://ift.tt/3BERpIP A false chimney breast created in a corner with a twin wall flue system, slate hearth, Victorian pressed brick slip chamber & an Ecosy Ottawa 5 Multifuel stove by Stove World UK 🔥

A lovely installation in Birmingham by our registered HETAS engineer at https://ift.tt/3BERpIP A false chimney breast created in a corner with a twin wall flue system, slate hearth, Victorian pressed brick slip chamber & an Ecosy Ottawa 5 Multifuel stove by Stove World UK 🔥 Latest update from Stove Specialists Ltd via Stove Specialists Ltd

A lovely installation in Birmingham by our registered HETAS engineer at https://ift.tt/3BERpIP A false chimney breast created in a corner with a twin wall flue system, slate hearth, Victorian pressed brick slip chamber & an Ecosy Ottawa 5 Multifuel stove by Stove World UK 🔥 Read More »

stove specialists ltd hetas engineer

REVIEWS

Check out some of our reviews below…