stove specialists ltd hetas engineer

Log Burner & Stove Installation at Great Prices

Wolverhampton | Birmingham | Telford | Oxford | Farnham | Exeter | Gloucester | Aylesbury | Bristol | Cheltenham | Oxford | Midlands | Somerset | Wiltshire | Surrey | Buckinghamshire | Hampshire | Berkshire | and many other parts of the UK

0800 832 1860

Freephone | Free Quotes

July 2022

You’re thinking about fitting a wood-burning stove and you’ve got the perfect space set aside for it. But have you left enough space? Deciding how much room to leave around the woodburner is influenced by two main factors: 1. The law Building regulations dictate that your stove must be positioned three times the diameter of the uninsulated flue pipe away from combustible materials. So, if you have a 6-inch flue, that’s at least 450mm (18in) from combustible materials. You can reduce this to one-and-a-half-times the diameter away from non-combustible materials by using a heat shield. If your stove is being placed within 300mm of a wall, and will sit on a hearth that abuts a wall, then the wall must be non-combustible to at least 300mm above the appliance and 1.2m above the hearth. There is no legal restriction on how close you can place the stove to a non-combustible surface, such as brick. However, that might be restricted by… 2. The manufacturer’s guidelines Your stove manufacturer will often give guidance on how far away the stove should be positioned from combustible materials to the front, back and side. This information can usually be found on the back of the appliance and in the stove manual. You might also find additional recommendations on how much space should be left from non-combustible surfaces. If no information is given by the manufacturer, a space of at least 80mm is advisable in order to allow air and heat circulation away from the stove. Struggling for space? If you’re finding it difficult to meet the minimum clearance recommended by a particular stove manufacturer, a possible solution is to fit a cassette stove or inset stove. These are designed to slot snugly into a recess and generally need much less space around them than traditional wood-burning stoves.

Stove Specialists Ltd

You’re thinking about fitting a wood-burning stove and you’ve got the perfect space set aside for it. But have you left enough space? Deciding how much room to leave around the woodburner is influenced by two main factors: 1. The law Building regulations dictate that your stove must be positioned three times the diameter of […]

You’re thinking about fitting a wood-burning stove and you’ve got the perfect space set aside for it. But have you left enough space? Deciding how much room to leave around the woodburner is influenced by two main factors: 1. The law Building regulations dictate that your stove must be positioned three times the diameter of the uninsulated flue pipe away from combustible materials. So, if you have a 6-inch flue, that’s at least 450mm (18in) from combustible materials. You can reduce this to one-and-a-half-times the diameter away from non-combustible materials by using a heat shield. If your stove is being placed within 300mm of a wall, and will sit on a hearth that abuts a wall, then the wall must be non-combustible to at least 300mm above the appliance and 1.2m above the hearth. There is no legal restriction on how close you can place the stove to a non-combustible surface, such as brick. However, that might be restricted by… 2. The manufacturer’s guidelines Your stove manufacturer will often give guidance on how far away the stove should be positioned from combustible materials to the front, back and side. This information can usually be found on the back of the appliance and in the stove manual. You might also find additional recommendations on how much space should be left from non-combustible surfaces. If no information is given by the manufacturer, a space of at least 80mm is advisable in order to allow air and heat circulation away from the stove. Struggling for space? If you’re finding it difficult to meet the minimum clearance recommended by a particular stove manufacturer, a possible solution is to fit a cassette stove or inset stove. These are designed to slot snugly into a recess and generally need much less space around them than traditional wood-burning stoves. Read More »

Owning a wood-burning stove is fantastic: you can lower your heating bills, become more environmentally friendly and create a cosier home. But there is no doubting that woodburners can be labour-intensive at times. While any work you put in towards operating your stove is usually rewarded in financial savings and the feeling of satisfaction once the appliance is in full flow, these great life hacks will make owning a woodburner easier. 1. Use the ashes to clean the stove glass A couple of labour-intensive activities: emptying the ashes and cleaning the glass. Why not combine the two by using the ashes to clean the glass. Dipping a piece of newspaper into cold ashes, then apply to your glass in a circular motion for an easy glass-cleaning shortcut. 2. Adopt a three-stage seasoning process Ensure a more efficient burn and get your stove roaring more quickly by using a three-stage seasoning process. Seasoning your own wood saves a lot of money on buying seasoned wood from fuel suppliers. Once you’ve got the wood the three stages are: freshly-felled, air dry and house dry 3. Use a moisture meter Check the moisture content of any piece of wood you’re considering burning to find out if it’s suitable for your woodburner. A meter costs less than £25 but has the potential to save you a fortune in fuel costs and stove parts. 4. Cook your dinner at the same time After lighting your stove, reward yourself for the effort by having it cook tea for you. One-pot dishes are particularly well suited to being cooked on top of a woodburner. Some appliances, like the Ecosy Ottowa have a small oven attachment specifically for that reason. 5. Light the stove properly This might seem obvious but if you’re spending time relighting your stove or watching it like a hawk in the minutes after lighting because it looks like it’s about to go out, you’re probably not lighting it well enough in the first place. Lighting a stove properly at the first time saves a lot of time and annoyance. Follow these tips to get your stove roaring in no time. 6. Use a stove thermometer It is possible to run your stove at too high a temperature, which can cause damage to it, or too low a temperature, which results in an inefficient burn. Avoid both of these problems by using a stove thermometer, which will inform you whether the appliance is at optimum temperature. 7. Leave the door ajar when the stove is out of use Leaving the door slightly open when the woodburner is out of use for extended periods will encourage air flow through the stove system, reducing the risk of corrosion and unnecessary expense on replacing parts. 8. Burn hardwood As a rule of thumb, hardwoods will take longer to burn than softwoods because they are more dense. This means less time spent refuelling for you. Do you have some wood-burning stove lifehacks of your own? Feel free to leave them as a comment below.

Stove Specialists Ltd

Owning a wood-burning stove is fantastic: you can lower your heating bills, become more environmentally friendly and create a cosier home. But there is no doubting that woodburners can be labour-intensive at times. While any work you put in towards operating your stove is usually rewarded in financial savings and the feeling of satisfaction once

Owning a wood-burning stove is fantastic: you can lower your heating bills, become more environmentally friendly and create a cosier home. But there is no doubting that woodburners can be labour-intensive at times. While any work you put in towards operating your stove is usually rewarded in financial savings and the feeling of satisfaction once the appliance is in full flow, these great life hacks will make owning a woodburner easier. 1. Use the ashes to clean the stove glass A couple of labour-intensive activities: emptying the ashes and cleaning the glass. Why not combine the two by using the ashes to clean the glass. Dipping a piece of newspaper into cold ashes, then apply to your glass in a circular motion for an easy glass-cleaning shortcut. 2. Adopt a three-stage seasoning process Ensure a more efficient burn and get your stove roaring more quickly by using a three-stage seasoning process. Seasoning your own wood saves a lot of money on buying seasoned wood from fuel suppliers. Once you’ve got the wood the three stages are: freshly-felled, air dry and house dry 3. Use a moisture meter Check the moisture content of any piece of wood you’re considering burning to find out if it’s suitable for your woodburner. A meter costs less than £25 but has the potential to save you a fortune in fuel costs and stove parts. 4. Cook your dinner at the same time After lighting your stove, reward yourself for the effort by having it cook tea for you. One-pot dishes are particularly well suited to being cooked on top of a woodburner. Some appliances, like the Ecosy Ottowa have a small oven attachment specifically for that reason. 5. Light the stove properly This might seem obvious but if you’re spending time relighting your stove or watching it like a hawk in the minutes after lighting because it looks like it’s about to go out, you’re probably not lighting it well enough in the first place. Lighting a stove properly at the first time saves a lot of time and annoyance. Follow these tips to get your stove roaring in no time. 6. Use a stove thermometer It is possible to run your stove at too high a temperature, which can cause damage to it, or too low a temperature, which results in an inefficient burn. Avoid both of these problems by using a stove thermometer, which will inform you whether the appliance is at optimum temperature. 7. Leave the door ajar when the stove is out of use Leaving the door slightly open when the woodburner is out of use for extended periods will encourage air flow through the stove system, reducing the risk of corrosion and unnecessary expense on replacing parts. 8. Burn hardwood As a rule of thumb, hardwoods will take longer to burn than softwoods because they are more dense. This means less time spent refuelling for you. Do you have some wood-burning stove lifehacks of your own? Feel free to leave them as a comment below. Read More »

What a fabulous installation of a Portway Arundell XL by Portway Stoves fitted by our registered HETAS engineer with a flexible flue liner & slate hearth in #aldershot #surrey 🔥

Stove Specialists Ltd

What a fabulous installation of a Portway Arundell XL by Portway Stoves fitted by our registered HETAS engineer with a flexible flue liner & slate hearth in #aldershot #surrey 🔥 Latest update from Stove Specialists Ltd via Stove Specialists Ltd – stove installation Stove Specialists Ltd Unit 1C, Chetwynd Lodge Chester Road Newport, Telford TF10

What a fabulous installation of a Portway Arundell XL by Portway Stoves fitted by our registered HETAS engineer with a flexible flue liner & slate hearth in #aldershot #surrey 🔥 Read More »

We get asked – and always do our best to answer – a lot of questions by people who are considering buying a wood-burning stove. A significant proportion of those questions start, “Can you install a wood-burning stove…?” With plenty of myths, misconceptions and misinformation floating around, many people are left wondering whether or not installing a woodburner in their property is even possible. So, with that in mind we’re trying to answer as many of those “Can you install a wood-burning stove…?” as we can in one post. Here we go. Can you install a wood-burning stove if you don’t have a chimney? Yes, there is no reason why you can’t install a wood-burning stove just because you don’t have a chimney. For most properties without a chimney, a twin wall flue will serve as the ideal chimney replacement. Can you install a wood-burning stove yourself? Logistically, yes, you can install a wood-burning stove yourself: it can be a fairly straightforward DIY job. But there are a few reasons why we recommend you leave the installation to a professional who is HETAS registered. Firstly, it’s not like putting up some shelves and one falling down. If you get something wrong with a stove installation, you’re potentially allowing poisonous gases into your home. Secondly, if you do the installation yourself, you will still need a HETAS engineer to check and certify the job to get a Certificate of Compliance. Registered HETAS engineers can self-certify the installation as being in compliance with building standards. Can you install a wood-burning stove without a flue liner? Yes, you can install a wood-burning stove without a flue liner as long as the stove is connected to a sound chimney that’s functioning properly. The advantage of using a flue liner even if you do have a good chimney is to improve performance. The draw up a flue pipe with a six-inch diameter should be stronger than up an open chimney. This can provide a more efficient burn, as well as minimising flue gases condensing in the chimney and forming creosote deposits. However we would always recommend a flue liner with every installation. Can you install a wood-burning stove in a flat? There is no specific reason why you can’t install a wood-burning stove in a flat, but there are a number of complications. If your flat has an existing fireplace, you’ll need to check – logistically and legally – how it connects with other fireplaces in your building. Ideally, you’ll want your fireplace to have its own flue right the way to the chimney pot, so that your installation doesn’t really impact on other flats. If there’s no existing fireplace, you’ll need to work out how to install a twin wall flue. If that entails running a flue pipe up the side of several neighbouring flats, you would need permission from each property. Can you install a wood-burning stove in an existing fireplace? Yes, you can install a wood-burning stove in an existing fireplace. The simplest way of doing so is by installing a inset stove, which will slot straight into a standard fireplace opening without the need for any building work to open up the fireplace. Can you install a wood-burning stove in a conservatory? Yes, you can install a wood-burning stove in a conservatory. As with any other room in your home, the installation must comply with building regulations. The aspect of the regulations that might be slightly trickier than in other rooms is adhering to the minimum distance to flammable materials, particularly when it comes to installing a flue through a polycarbonate conservatory roof. This can be achieved through the use of a twin wall flue and rubber flashing. Can you install a wood-burning stove in a new home? Unless your developer has made you agree to conditions to the contrary (which would be very unusual) there is no reason why you can’t install a wood-burning stove in a new home. The only requirement would be compliance with wood-burning stove building regulations. Even if the new build property has no chimney, a woodburner installation could be achieved with the use of a twin wall flue. You will need to ensure the flue outlet height, hearth design and size and distance between the stove and combustible materials are in accordance with the regulations. Can you install a wood-burning stove in a mobile home? Yes, you can install a wood-burning stove in a mobile home. Since mobile homes are not covered by building regulations, the onus is on you and your installer to ensure the installation is safe. This includes making sure your stove is a suitable distance away from flammable materials. Can you install a wood-burning stove in a kitchen? Yes, you can install a wood-burning stove in a kitchen, but you are likely to need a woodburner with an external air supply. Until a couple of years ago, you weren’t allowed to install a stove in a room in which there was any form of mechanical extraction in operation. This included the use of extractor fans that are above the vast majority of cookers due to fears that the fan could ‘pull’ harmful gases into the room. New regulations permit such installation as long as the stove has an external air supply that makes it independent of the ventilation within the kitchen. Can you install a wood-burning stove if you live in a city? Yes, urban dwellers are just as entitled to the warmth of a woodburner as the rest of us. You can install a woodburner even if you live in a smoke control area, one of the designated zones in which burning fuel was banned in to tackle smog in the 1960s. In order to install a wood-burning stove that can be used in a smoke control area you simply need to choose a DEFRA exempt wood burner(StoveSpecialistsUK always recommend DEFRA approved stoves as standard). These are appliances designated for use in smoke control areas by the Department for Environment, Food and Rural Affairs. See our full range of DEFRA exempt stoves on our website. We hope that this article has answered all of your ‘Can you install a wood-burning stove…?’ questions. If not, feel free to leave your question as a comment below and we’ll do our best to answer it for you 🔥

Stove Specialists Ltd

We get asked – and always do our best to answer – a lot of questions by people who are considering buying a wood-burning stove. A significant proportion of those questions start, “Can you install a wood-burning stove…?” With plenty of myths, misconceptions and misinformation floating around, many people are left wondering whether or not

We get asked – and always do our best to answer – a lot of questions by people who are considering buying a wood-burning stove. A significant proportion of those questions start, “Can you install a wood-burning stove…?” With plenty of myths, misconceptions and misinformation floating around, many people are left wondering whether or not installing a woodburner in their property is even possible. So, with that in mind we’re trying to answer as many of those “Can you install a wood-burning stove…?” as we can in one post. Here we go. Can you install a wood-burning stove if you don’t have a chimney? Yes, there is no reason why you can’t install a wood-burning stove just because you don’t have a chimney. For most properties without a chimney, a twin wall flue will serve as the ideal chimney replacement. Can you install a wood-burning stove yourself? Logistically, yes, you can install a wood-burning stove yourself: it can be a fairly straightforward DIY job. But there are a few reasons why we recommend you leave the installation to a professional who is HETAS registered. Firstly, it’s not like putting up some shelves and one falling down. If you get something wrong with a stove installation, you’re potentially allowing poisonous gases into your home. Secondly, if you do the installation yourself, you will still need a HETAS engineer to check and certify the job to get a Certificate of Compliance. Registered HETAS engineers can self-certify the installation as being in compliance with building standards. Can you install a wood-burning stove without a flue liner? Yes, you can install a wood-burning stove without a flue liner as long as the stove is connected to a sound chimney that’s functioning properly. The advantage of using a flue liner even if you do have a good chimney is to improve performance. The draw up a flue pipe with a six-inch diameter should be stronger than up an open chimney. This can provide a more efficient burn, as well as minimising flue gases condensing in the chimney and forming creosote deposits. However we would always recommend a flue liner with every installation. Can you install a wood-burning stove in a flat? There is no specific reason why you can’t install a wood-burning stove in a flat, but there are a number of complications. If your flat has an existing fireplace, you’ll need to check – logistically and legally – how it connects with other fireplaces in your building. Ideally, you’ll want your fireplace to have its own flue right the way to the chimney pot, so that your installation doesn’t really impact on other flats. If there’s no existing fireplace, you’ll need to work out how to install a twin wall flue. If that entails running a flue pipe up the side of several neighbouring flats, you would need permission from each property. Can you install a wood-burning stove in an existing fireplace? Yes, you can install a wood-burning stove in an existing fireplace. The simplest way of doing so is by installing a inset stove, which will slot straight into a standard fireplace opening without the need for any building work to open up the fireplace. Can you install a wood-burning stove in a conservatory? Yes, you can install a wood-burning stove in a conservatory. As with any other room in your home, the installation must comply with building regulations. The aspect of the regulations that might be slightly trickier than in other rooms is adhering to the minimum distance to flammable materials, particularly when it comes to installing a flue through a polycarbonate conservatory roof. This can be achieved through the use of a twin wall flue and rubber flashing. Can you install a wood-burning stove in a new home? Unless your developer has made you agree to conditions to the contrary (which would be very unusual) there is no reason why you can’t install a wood-burning stove in a new home. The only requirement would be compliance with wood-burning stove building regulations. Even if the new build property has no chimney, a woodburner installation could be achieved with the use of a twin wall flue. You will need to ensure the flue outlet height, hearth design and size and distance between the stove and combustible materials are in accordance with the regulations. Can you install a wood-burning stove in a mobile home? Yes, you can install a wood-burning stove in a mobile home. Since mobile homes are not covered by building regulations, the onus is on you and your installer to ensure the installation is safe. This includes making sure your stove is a suitable distance away from flammable materials. Can you install a wood-burning stove in a kitchen? Yes, you can install a wood-burning stove in a kitchen, but you are likely to need a woodburner with an external air supply. Until a couple of years ago, you weren’t allowed to install a stove in a room in which there was any form of mechanical extraction in operation. This included the use of extractor fans that are above the vast majority of cookers due to fears that the fan could ‘pull’ harmful gases into the room. New regulations permit such installation as long as the stove has an external air supply that makes it independent of the ventilation within the kitchen. Can you install a wood-burning stove if you live in a city? Yes, urban dwellers are just as entitled to the warmth of a woodburner as the rest of us. You can install a woodburner even if you live in a smoke control area, one of the designated zones in which burning fuel was banned in to tackle smog in the 1960s. In order to install a wood-burning stove that can be used in a smoke control area you simply need to choose a DEFRA exempt wood burner(StoveSpecialistsUK always recommend DEFRA approved stoves as standard). These are appliances designated for use in smoke control areas by the Department for Environment, Food and Rural Affairs. See our full range of DEFRA exempt stoves on our website. We hope that this article has answered all of your ‘Can you install a wood-burning stove…?’ questions. If not, feel free to leave your question as a comment below and we’ll do our best to answer it for you 🔥 Read More »

It’s #TestItTuesday have you pressed the button & tested your alarm ? Know the signs & stay safe ! Every full installation package booked in today with Stove Specialists Ltd will receive a FREE Carbon Monoxide Alarm 🔥 #TestItTuesday #carbonmonoxideawareness #staysafe

Stove Specialists Ltd

It’s #TestItTuesday have you pressed the button & tested your alarm ? Know the signs & stay safe ! Every full installation package booked in today with Stove Specialists Ltd will receive a FREE Carbon Monoxide Alarm 🔥 #TestItTuesday #carbonmonoxideawareness #staysafe Latest update from Stove Specialists Ltd via Stove Specialists Ltd – stove installation Stove

It’s #TestItTuesday have you pressed the button & tested your alarm ? Know the signs & stay safe ! Every full installation package booked in today with Stove Specialists Ltd will receive a FREE Carbon Monoxide Alarm 🔥 #TestItTuesday #carbonmonoxideawareness #staysafe Read More »

A stunning Portway Arundel XL by Portway Stoves with full chimney build and slate hearth by our registered HETAS engineer….what a transformation in #oxted #surrey 🔥

Stove Specialists Ltd

A stunning Portway Arundel XL by Portway Stoves with full chimney build and slate hearth by our registered HETAS engineer….what a transformation in #oxted #surrey 🔥 Latest update from Stove Specialists Ltd via Stove Specialists Ltd – stove installation Stove Specialists Ltd Unit 1C, Chetwynd Lodge Chester Road Newport, Telford TF10 8AB +44-1902-519089

A stunning Portway Arundel XL by Portway Stoves with full chimney build and slate hearth by our registered HETAS engineer….what a transformation in #oxted #surrey 🔥 Read More »

Should you use the top flue exit or the rear flue exit on your woodburner? Many appliances come with the option of having the flue connect on either the top or the rear of the stove body. The woodburner will usually come with a blanking plate to seal the flue exit that will not be in use. Typically a stove will arrive configured with the flue collar on top and geared up for use with the top flue exit, but it is easy to swap to the rear flue exit But which option is best? Using top flue exit Generally, using the top flue exit will create a more elegant look, particularly in the case of freestanding stoves when all of the stove is on display. The straight line out of the appliance and skywards creates an aesthetically satisfying appearance. The straight flue also gives an easier path for the flue gases, so that can lead to slight performance benefits in terms of the draw up your chimney. Using rear flue exit Using the rear flue exit can have benefits, particularly if the stove is being fitted within a fireplace recess. If three-quarters of the stove are surrounded by the fireplace, a lot of heat will go towards heating the inside walls of the fireplace rather than the room. Using the rear flue exit will immediately cause the appliance to jut further into the room and make better use of the fuel you’re burning. The rear flue exit may provide slight benefits in terms of the amount of heat generated. The flue gases have slightly further to travel before exiting the firebox than when the top flue exit is use, so more of the flammable gases may be burnt as a result. Downsides of using the rear exit are that it might be trickier to sweep your chimney and also that it might be slightly harder to light your stove when the chimney is cold.

Stove Specialists Ltd

Should you use the top flue exit or the rear flue exit on your woodburner? Many appliances come with the option of having the flue connect on either the top or the rear of the stove body. The woodburner will usually come with a blanking plate to seal the flue exit that will not be

Should you use the top flue exit or the rear flue exit on your woodburner? Many appliances come with the option of having the flue connect on either the top or the rear of the stove body. The woodburner will usually come with a blanking plate to seal the flue exit that will not be in use. Typically a stove will arrive configured with the flue collar on top and geared up for use with the top flue exit, but it is easy to swap to the rear flue exit But which option is best? Using top flue exit Generally, using the top flue exit will create a more elegant look, particularly in the case of freestanding stoves when all of the stove is on display. The straight line out of the appliance and skywards creates an aesthetically satisfying appearance. The straight flue also gives an easier path for the flue gases, so that can lead to slight performance benefits in terms of the draw up your chimney. Using rear flue exit Using the rear flue exit can have benefits, particularly if the stove is being fitted within a fireplace recess. If three-quarters of the stove are surrounded by the fireplace, a lot of heat will go towards heating the inside walls of the fireplace rather than the room. Using the rear flue exit will immediately cause the appliance to jut further into the room and make better use of the fuel you’re burning. The rear flue exit may provide slight benefits in terms of the amount of heat generated. The flue gases have slightly further to travel before exiting the firebox than when the top flue exit is use, so more of the flammable gases may be burnt as a result. Downsides of using the rear exit are that it might be trickier to sweep your chimney and also that it might be slightly harder to light your stove when the chimney is cold. Read More »

UK COVERAGE

Our head office is based in Shropshire, making it really easy for us to come and see you wherever you are located in the UK.
We are able to supply and install your wood burning or multi fuel stove where ever you need including: Wolverhampton, Birmingham, Telford, Oxford, Farnham, Exeter, Gloucester, Aylesbury, Bristol, Cheltenham, London M25, Oxford, Midlands, Somerset, Wiltshire, Surrey, Buckinghamshire, Hampshire, Berkshire and many other parts of the UK.

Birmingham, Telford, Wolverhampton, Dudley, Bridgnorth, Kidderminster, Cannock, Solihull, Coventry, Redditch, Bromsgrove, Stourbridge, Ludlow, Droitwich Spa, Worcester, Sutton Coldfield, Leamington Spa, Hereford, Cheltenham, Gloucester, Stroud, Banbury, Chipping Norton, Oxford, Aylesbury, Guildford, Swindon, Reading, Cirencester, Faringdon, Chippenham, Bath, Bristol, Farnham, Marlborough, Slough, Bracknell, Basingstoke, Andover, Winchester, Salisbury, Warminster, Devizes, Glastonbury.

Check out
our reviews
  • Stove Specialists Ltd
  • The Red House, High Street, Albrighton
    Wolverhampton WV7 3LU
  • Free Phone: 0800 8321860
  • Wolverhampton: 01902 519059
  • Birmingham: 0121 330 1404
  • Oxford: 01865 694074

Stove Specialists Ltd – a Registered Hetas Engineer is a UK hetas registered stove installer – that specialises in wood burning and multi-fuel stove installations and chimney constructions.

We can simply install a stove you supply or we can supply an approved designer stove to suit your needs and install and fit it 100% hassle-free. Ask for details

Facebook-f Google-plus-g
hetas engineer registered installer ltd
satisfaction guarantee for stove installation

QUICK ENQUIRY

1. Contact Form
Copyright © 2024 Stove Specialists Ltd

Company number: 14622838
Registered address: The Red House, Albrighton, WOLVERHAMPTON WV7 3JU

Hetas Engineer Stove Specialists Ltd
CloseMenu
stove specialists ltd hetas engineer

REVIEWS

Check out some of our reviews below…