stove specialists uk hetas engineer

Log Burner & Stove Installation at Great Prices

Wolverhampton | Birmingham | Telford | Oxford | Farnham | Exeter | Gloucester | Aylesbury | Bristol | Cheltenham | Oxford | Midlands | Somerset | Wiltshire | Surrey | Buckinghamshire | Hampshire | Berkshire | and many other parts of the UK

0800 832 1860

Freephone | Free Quotes

October 26, 2022

A lovely installation of an Ecosy Panoramic wood only stove by Stove World UK fitted with our twin wall flue system by our registered HETAS engineer in #Aylesbury 🔥

Stove Specialists Ltd

A lovely installation of an Ecosy Panoramic wood only stove by Stove World UK fitted with our twin wall flue system by our registered HETAS engineer in #Aylesbury 🔥 Latest update from Stove Specialists Ltd via Stove Specialists Ltd – stove installation Stove Specialists Ltd Unit 1C, Chetwynd Lodge Chester Road Newport, Telford TF10 8AB […]

A lovely installation of an Ecosy Panoramic wood only stove by Stove World UK fitted with our twin wall flue system by our registered HETAS engineer in #Aylesbury 🔥 Read More »

Should you use the top flue exit or the rear flue exit on your woodburner? Many appliances come with the option of having the flue connect on either the top or the rear of the stove body. The woodburner will usually come with a blanking plate to seal the flue exit that will not be in use. Typically a stove will arrive configured with the flue collar on top and geared up for use with the top flue exit, but it is easy to swap to the rear flue exit But which option is best? Using top flue exit Generally, using the top flue exit will create a more elegant look, particularly in the case of freestanding stoves when all of the stove is on display. The straight line out of the appliance and skywards creates an aesthetically satisfying appearance. The straight flue also gives an easier path for the flue gases, so that can lead to slight performance benefits in terms of the draw up your chimney. Using rear flue exit Using the rear flue exit can have benefits, particularly if the stove is being fitted within a fireplace recess. If three-quarters of the stove are surrounded by the fireplace, a lot of heat will go towards heating the inside walls of the fireplace rather than the room. Using the rear flue exit will immediately cause the appliance to jut further into the room and make better use of the fuel you’re burning. The rear flue exit may provide slight benefits in terms of the amount of heat generated. The flue gases have slightly further to travel before exiting the firebox than when the top flue exit is use, so more of the flammable gases may be burnt as a result. Downsides of using the rear exit are that it might be trickier to sweep your chimney and also that it might be slightly harder to light your stove when the chimney is cold.

Stove Specialists Ltd

Should you use the top flue exit or the rear flue exit on your woodburner? Many appliances come with the option of having the flue connect on either the top or the rear of the stove body. The woodburner will usually come with a blanking plate to seal the flue exit that will not be

Should you use the top flue exit or the rear flue exit on your woodburner? Many appliances come with the option of having the flue connect on either the top or the rear of the stove body. The woodburner will usually come with a blanking plate to seal the flue exit that will not be in use. Typically a stove will arrive configured with the flue collar on top and geared up for use with the top flue exit, but it is easy to swap to the rear flue exit But which option is best? Using top flue exit Generally, using the top flue exit will create a more elegant look, particularly in the case of freestanding stoves when all of the stove is on display. The straight line out of the appliance and skywards creates an aesthetically satisfying appearance. The straight flue also gives an easier path for the flue gases, so that can lead to slight performance benefits in terms of the draw up your chimney. Using rear flue exit Using the rear flue exit can have benefits, particularly if the stove is being fitted within a fireplace recess. If three-quarters of the stove are surrounded by the fireplace, a lot of heat will go towards heating the inside walls of the fireplace rather than the room. Using the rear flue exit will immediately cause the appliance to jut further into the room and make better use of the fuel you’re burning. The rear flue exit may provide slight benefits in terms of the amount of heat generated. The flue gases have slightly further to travel before exiting the firebox than when the top flue exit is use, so more of the flammable gases may be burnt as a result. Downsides of using the rear exit are that it might be trickier to sweep your chimney and also that it might be slightly harder to light your stove when the chimney is cold. Read More »

Can you put a woodburner flue through a polycarbonate roof on a conservatory? One of the most frequent questions we are asked by people who are interested in installing a wood-burning stove in a conservatory is: can you have a woodburner flue running through a polycarbonate roof? Conservatories are very popular places to install stoves. Given that they are living rooms in which people want to spend time relaxing, yet can become cool in autumn, winter and spring given the amount of glass, it is very appealing to add a boost of warmth that makes it a comfortable environment all year round. Understandably, a major concern before going ahead with an installation is the safety concerns about putting a flue pipe through the plastic roofs – usually polycarbonate – that tend to be used on conservatories. The good news is that it is safe to pass a flue pipe through a conservatory roof as long as you follow these steps… Use a twin wall flue Sometimes called an insulated flue, a twin wall flue is a flue pipe surrounded by a layer of insulation, surrounded by another pipe. It will not got as hot as a single wall flue and is therefore safe for use with the polycarbonate roof. Use rubber flashing You probably won’t be able to screw or fix a lot of flashing options to the polycarbonate roof. If this is the case for your conservatory, simply use rubber flashing sealed onto the roof with silicone to keep rainwater out. If this looks unsightly from inside the conservatory, you can place a cover plate at the top of the flue before it exits the conservatory. Consider the Building Regulations The place at which you choose to put a flue through your polycarbonate roof might be influenced by the Building Regulations. For example, Document J of the regulations states that a flue must terminate at least 2.3 metres away from any window horizontally. Make sure you’ve studied the regulations and given due consideration to the position of your appliance within the conservatory before starting to make a hole in the conservatory roof.

Stove Specialists Ltd

Can you put a woodburner flue through a polycarbonate roof on a conservatory? One of the most frequent questions we are asked by people who are interested in installing a wood-burning stove in a conservatory is: can you have a woodburner flue running through a polycarbonate roof? Conservatories are very popular places to install stoves.

Can you put a woodburner flue through a polycarbonate roof on a conservatory? One of the most frequent questions we are asked by people who are interested in installing a wood-burning stove in a conservatory is: can you have a woodburner flue running through a polycarbonate roof? Conservatories are very popular places to install stoves. Given that they are living rooms in which people want to spend time relaxing, yet can become cool in autumn, winter and spring given the amount of glass, it is very appealing to add a boost of warmth that makes it a comfortable environment all year round. Understandably, a major concern before going ahead with an installation is the safety concerns about putting a flue pipe through the plastic roofs – usually polycarbonate – that tend to be used on conservatories. The good news is that it is safe to pass a flue pipe through a conservatory roof as long as you follow these steps… Use a twin wall flue Sometimes called an insulated flue, a twin wall flue is a flue pipe surrounded by a layer of insulation, surrounded by another pipe. It will not got as hot as a single wall flue and is therefore safe for use with the polycarbonate roof. Use rubber flashing You probably won’t be able to screw or fix a lot of flashing options to the polycarbonate roof. If this is the case for your conservatory, simply use rubber flashing sealed onto the roof with silicone to keep rainwater out. If this looks unsightly from inside the conservatory, you can place a cover plate at the top of the flue before it exits the conservatory. Consider the Building Regulations The place at which you choose to put a flue through your polycarbonate roof might be influenced by the Building Regulations. For example, Document J of the regulations states that a flue must terminate at least 2.3 metres away from any window horizontally. Make sure you’ve studied the regulations and given due consideration to the position of your appliance within the conservatory before starting to make a hole in the conservatory roof. Read More »

CloseMenu
stove specialists ltd hetas engineer

REVIEWS

Check out some of our reviews below…