stove specialists ltd hetas engineer

Log Burner & Stove Installation at Great Prices

Wolverhampton | Birmingham | Telford | Oxford | Farnham | Exeter | Gloucester | Aylesbury | Bristol | Cheltenham | Oxford | Midlands | Somerset | Wiltshire | Surrey | Buckinghamshire | Hampshire | Berkshire | and many other parts of the UK

0800 832 1860

Freephone | Free Quotes

October 2022

A lovely installation of a Tinderbox medium, a full knock out finished with a slate hearth & our customers own surround by our registered HETAS engineer in #birmingham #westmidlands 🔥

Stove Specialists Ltd

A lovely installation of a Tinderbox medium, a full knock out finished with a slate hearth & our customers own surround by our registered HETAS engineer in #birmingham #westmidlands 🔥 Latest update from Stove Specialists Ltd via Stove Specialists Ltd – stove installation Stove Specialists Ltd Unit 1C, Chetwynd Lodge Chester Road Newport, Telford TF10 […]

A lovely installation of a Tinderbox medium, a full knock out finished with a slate hearth & our customers own surround by our registered HETAS engineer in #birmingham #westmidlands 🔥 Read More »

If you’re wondering, ‘Do I need a carbon monoxide detector for a woodburner?’,the short answer is yes. That’s because carbon monoxide is such a deadly gas, your household’s lives so valuable and a carbon monoxide detector so relatively inexpensive that it would be foolish not to get one. That was the common sense answer to the question. Now onto the legal interpretation. If your wood-burning stove was installed after October 2010 then you must have a carbon monoxide detector installed, too. It is a legal requirement. In October 2010, Document J of the Building Regulations, which covers the installation of wood-burning stoves and multi-fuel stoves, was updated and made carbon monoxide alarms compulsory with all new installations. If your stove was installed before October 2010, you are under no legal obligation to have a carbon monoxide detector with your woodburner. But for the reasons we have already touched upon, it makes sense to get one. The alarm must be located in the same room as the appliance. It must be either on the ceiling and at least 300mm from any wall or on a wall, as high as possible and certainly above any doors or windows, but not within 150mm of the ceiling. Whether on the ceiling or the wall, the horizontal distance between the carbon monoxide alarm and the woodburner should be between 1m and 3m. For anyone who isn’t aware of the grave dangers posed by carbon monoxide, it is a silent, odourless and potentially fatal gas. Any heating appliance that involves burning fuel poses a risk of carbon monoxide poisoning in the event that a leak occurs. Carbon monoxide detectors are relatively inexpensive and start from as little as £10-£15. Put that into the context of the cost of a meal out, let alone the cost of losing those you dine out with, and it really isn’t much to spend on a potential life-saver and the peace of mind it brings.

Stove Specialists Ltd

If you’re wondering, ‘Do I need a carbon monoxide detector for a woodburner?’,the short answer is yes. That’s because carbon monoxide is such a deadly gas, your household’s lives so valuable and a carbon monoxide detector so relatively inexpensive that it would be foolish not to get one. That was the common sense answer to

If you’re wondering, ‘Do I need a carbon monoxide detector for a woodburner?’,the short answer is yes. That’s because carbon monoxide is such a deadly gas, your household’s lives so valuable and a carbon monoxide detector so relatively inexpensive that it would be foolish not to get one. That was the common sense answer to the question. Now onto the legal interpretation. If your wood-burning stove was installed after October 2010 then you must have a carbon monoxide detector installed, too. It is a legal requirement. In October 2010, Document J of the Building Regulations, which covers the installation of wood-burning stoves and multi-fuel stoves, was updated and made carbon monoxide alarms compulsory with all new installations. If your stove was installed before October 2010, you are under no legal obligation to have a carbon monoxide detector with your woodburner. But for the reasons we have already touched upon, it makes sense to get one. The alarm must be located in the same room as the appliance. It must be either on the ceiling and at least 300mm from any wall or on a wall, as high as possible and certainly above any doors or windows, but not within 150mm of the ceiling. Whether on the ceiling or the wall, the horizontal distance between the carbon monoxide alarm and the woodburner should be between 1m and 3m. For anyone who isn’t aware of the grave dangers posed by carbon monoxide, it is a silent, odourless and potentially fatal gas. Any heating appliance that involves burning fuel poses a risk of carbon monoxide poisoning in the event that a leak occurs. Carbon monoxide detectors are relatively inexpensive and start from as little as £10-£15. Put that into the context of the cost of a meal out, let alone the cost of losing those you dine out with, and it really isn’t much to spend on a potential life-saver and the peace of mind it brings. Read More »

Stove Specialists Ltd

Latest update from Stove Specialists Ltd via Stove Specialists Ltd – stove installation Stove Specialists Ltd Unit 1C, Chetwynd Lodge Chester Road Newport, Telford TF10 8AB +44-1902-519089

Read More »

It’s #TestItTuesday time! Have you checked your Smoke Alarms & Carbon Monoxide alarms today? Please check your alarms in accordance with the manufacturers instructions. Carbon Monoxide You can’t see it You can’t smell it You can’t taste it Test your alarm now & stay safe 🔥

Stove Specialists Ltd

It’s #TestItTuesday time! Have you checked your Smoke Alarms & Carbon Monoxide alarms today? Please check your alarms in accordance with the manufacturers instructions. Carbon Monoxide You can’t see it You can’t smell it You can’t taste it Test your alarm now & stay safe 🔥 Latest update from Stove Specialists Ltd via Stove Specialists

It’s #TestItTuesday time! Have you checked your Smoke Alarms & Carbon Monoxide alarms today? Please check your alarms in accordance with the manufacturers instructions. Carbon Monoxide You can’t see it You can’t smell it You can’t taste it Test your alarm now & stay safe 🔥 Read More »

A lovely installation by our registered HETAS engineer in #wheatonaston #staffordshire 🔥

Stove Specialists Ltd

A lovely installation by our registered HETAS engineer in #wheatonaston #staffordshire 🔥 Latest update from Stove Specialists Ltd via Stove Specialists Ltd – stove installation Stove Specialists Ltd Unit 1C, Chetwynd Lodge Chester Road Newport, Telford TF10 8AB +44-1902-519089

A lovely installation by our registered HETAS engineer in #wheatonaston #staffordshire 🔥 Read More »

Ecodesign is the European-wide programme to lower emissions. It is due to come into force for stoves in the UK in 2022. SIA Ecodesign Ready stoves all meet the Ecodesign requirements. The PM emissions limit for Ecodesign is 55% lower than for DEFRA exempt stoves. Burning wood produces particulate matter (PM) but the amount produced depends on how the wood is burnt. Independent research has shown that SIA Ecodesign Ready stoves can reduce particulate emissions by 90% compared to an open fire and 80% compared to an old stove. Both Defra and the Mayor of London are backing the installation of SIA Ecodesign Ready stoves to reduce emissions from wood burning. In its Clean Air Strategy Defra recognises that all wood burning is not the same and that reductions in particulate emissions, (PM), can be achieved through the installation of Ecodesign Ready stoves burning Ready to Burn logs.

Stove Specialists Ltd

Ecodesign is the European-wide programme to lower emissions. It is due to come into force for stoves in the UK in 2022. SIA Ecodesign Ready stoves all meet the Ecodesign requirements. The PM emissions limit for Ecodesign is 55% lower than for DEFRA exempt stoves. Burning wood produces particulate matter (PM) but the amount produced

Ecodesign is the European-wide programme to lower emissions. It is due to come into force for stoves in the UK in 2022. SIA Ecodesign Ready stoves all meet the Ecodesign requirements. The PM emissions limit for Ecodesign is 55% lower than for DEFRA exempt stoves. Burning wood produces particulate matter (PM) but the amount produced depends on how the wood is burnt. Independent research has shown that SIA Ecodesign Ready stoves can reduce particulate emissions by 90% compared to an open fire and 80% compared to an old stove. Both Defra and the Mayor of London are backing the installation of SIA Ecodesign Ready stoves to reduce emissions from wood burning. In its Clean Air Strategy Defra recognises that all wood burning is not the same and that reductions in particulate emissions, (PM), can be achieved through the installation of Ecodesign Ready stoves burning Ready to Burn logs. Read More »

Half term is here, is a staycation on the agenda for you ? Static caravans, log cabins and mobile homes make for great holiday hideaways but, given that they are usually made of fairly thin metal, in cooler weather they are not always the cosiest of places in which to relax. Increasingly, people are installing woodburners in their caravan to ensure that the British climate doesn’t reduce the amount of time they can spend there, and to create a snug and homely atmosphere for their family. But many people are still unsure about the feasibility of such a project. A large number of caravan owners still contact us to ask: “Is it possible to install a wood-burning stove in a caravan?” This answer is always a resounding ‘yes’, as long as it is a well-planned and safely carried out by a qualified registered HETAS engineer. Inevitably, there are a lot of considerations along the way. Here are some of the main ones… Fireproof materials Your installation is likely to include changing materials in the vicinity of your new stove. It’s a legal requirement that you don’t have flammable materials next to your stove. That means wood and hardboard must be kept well away. Building a hearth Remember that among those fireproof materials surrounding your stove, it will need to rest on a hearth. This is a requirement for the aforementioned Building Regulations. The hole in the roof Obviously you’ll need to run a flue pipe through the roof of your caravan. And, equally obviously, it’s something you’ll want to get right first time. Do your research before even thinking about making a start on the hole. We recommend using a professional installer. We know that many caravan owners enjoy the challenge of installing their woodburner as a DIY project. But we would recommend you consider bringing in a HETAS-qualified engineer who is well versed in all the legal and safety requirements of your installation. Flue walls There is likely to be wood in the roof structure of your caravan, which poses a fire risk when positioned next to a standard single wall flue pipe. So we recommend a twin wall flue system. Any HETAS engineer would be able to advise you on the most suitable way of achieving this in your caravan. If a stove is something you are interested in for your holiday home, get in touch 🔥 💻 info@stovespecialists.co.uk 📞 08008321860 Message us through our Facebook page 🔥

Stove Specialists Ltd

Half term is here, is a staycation on the agenda for you ? Static caravans, log cabins and mobile homes make for great holiday hideaways but, given that they are usually made of fairly thin metal, in cooler weather they are not always the cosiest of places in which to relax. Increasingly, people are installing

Half term is here, is a staycation on the agenda for you ? Static caravans, log cabins and mobile homes make for great holiday hideaways but, given that they are usually made of fairly thin metal, in cooler weather they are not always the cosiest of places in which to relax. Increasingly, people are installing woodburners in their caravan to ensure that the British climate doesn’t reduce the amount of time they can spend there, and to create a snug and homely atmosphere for their family. But many people are still unsure about the feasibility of such a project. A large number of caravan owners still contact us to ask: “Is it possible to install a wood-burning stove in a caravan?” This answer is always a resounding ‘yes’, as long as it is a well-planned and safely carried out by a qualified registered HETAS engineer. Inevitably, there are a lot of considerations along the way. Here are some of the main ones… Fireproof materials Your installation is likely to include changing materials in the vicinity of your new stove. It’s a legal requirement that you don’t have flammable materials next to your stove. That means wood and hardboard must be kept well away. Building a hearth Remember that among those fireproof materials surrounding your stove, it will need to rest on a hearth. This is a requirement for the aforementioned Building Regulations. The hole in the roof Obviously you’ll need to run a flue pipe through the roof of your caravan. And, equally obviously, it’s something you’ll want to get right first time. Do your research before even thinking about making a start on the hole. We recommend using a professional installer. We know that many caravan owners enjoy the challenge of installing their woodburner as a DIY project. But we would recommend you consider bringing in a HETAS-qualified engineer who is well versed in all the legal and safety requirements of your installation. Flue walls There is likely to be wood in the roof structure of your caravan, which poses a fire risk when positioned next to a standard single wall flue pipe. So we recommend a twin wall flue system. Any HETAS engineer would be able to advise you on the most suitable way of achieving this in your caravan. If a stove is something you are interested in for your holiday home, get in touch 🔥 💻 info@stovespecialists.co.uk 📞 08008321860 Message us through our Facebook page 🔥 Read More »

UK COVERAGE

Our head office is based in Shropshire, making it really easy for us to come and see you wherever you are located in the UK.
We are able to supply and install your wood burning or multi fuel stove where ever you need including: Wolverhampton, Birmingham, Telford, Oxford, Farnham, Exeter, Gloucester, Aylesbury, Bristol, Cheltenham, London M25, Oxford, Midlands, Somerset, Wiltshire, Surrey, Buckinghamshire, Hampshire, Berkshire and many other parts of the UK.

Birmingham, Telford, Wolverhampton, Dudley, Bridgnorth, Kidderminster, Cannock, Solihull, Coventry, Redditch, Bromsgrove, Stourbridge, Ludlow, Droitwich Spa, Worcester, Sutton Coldfield, Leamington Spa, Hereford, Cheltenham, Gloucester, Stroud, Banbury, Chipping Norton, Oxford, Aylesbury, Guildford, Swindon, Reading, Cirencester, Faringdon, Chippenham, Bath, Bristol, Farnham, Marlborough, Slough, Bracknell, Basingstoke, Andover, Winchester, Salisbury, Warminster, Devizes, Glastonbury.

Check out
our reviews
  • Stove Specialists Ltd
  • The Red House, High Street, Albrighton
    Wolverhampton WV7 3LU
  • Free Phone: 0800 8321860
  • Wolverhampton: 01902 519059
  • Birmingham: 0121 330 1404
  • Oxford: 01865 694074

Stove Specialists Ltd – a Registered Hetas Engineer is a UK hetas registered stove installer – that specialises in wood burning and multi-fuel stove installations and chimney constructions.

We can simply install a stove you supply or we can supply an approved designer stove to suit your needs and install and fit it 100% hassle-free. Ask for details

Facebook-f Google-plus-g
hetas engineer registered installer ltd
satisfaction guarantee for stove installation

QUICK ENQUIRY

1. Contact Form
Copyright © 2024 Stove Specialists Ltd

Company number: 14622838
Registered address: The Red House, Albrighton, WOLVERHAMPTON WV7 3JU

Hetas Engineer Stove Specialists Ltd
CloseMenu
stove specialists ltd hetas engineer

REVIEWS

Check out some of our reviews below…